"

捷丙直播-美女体育直播-【米fun直播】拥有全球最顶尖的原生APP,每天为您提供千场精彩体育赛事,捷丙直播-美女体育直播-【米fun直播】更有真人、彩票、电子老虎机、真人电子竞技游戏等多种娱乐方式选择,捷丙直播-美女体育直播-【米fun直播】让您尽享娱乐、赛事投注等,且无后顾之忧!

    <form id="xvvnv"></form>

    <address id="xvvnv"></address>

      <address id="xvvnv"></address>

      <form id="xvvnv"><nobr id="xvvnv"><meter id="xvvnv"></meter></nobr></form>

      "

       手动工具 Manual Tool                                                                                     

      • STK provides the whole manual tools which is applied for high pressure.It can be manually complete the inner hole、chamfering cylindrical、teeth、steel tubing thread.

      STK提供完整的用于超高压应用的手动工具,能够手动地完成内孔倒角、外圆倒角、钢管扳牙等。

      • Size range can be machined in the 1/8”~9/16”,convenient installation , test and repair.

      尺寸范围在1/8"~9/16"都能够加工,方便现场安装,调试,维修。

      • The STK tool is the only ultra pressure tool manufacturer in China,our products can replace foreign products perfectly.

      STK是中国高品质超高压工具的生产商,其产品完美地替代了进口产品。

       手动工具 Manual Tool                                                                                       

      • Coning Tool can process tubing taper,angle is about 57°~59°.

      倒外圆锥工具可以加工钢管的锥度,角度约57°~59°。

      • Chuck and bit tool can be replaced,the same tools can be processed tubing of 1/4 "O.D、3/8 " O.D、9/16" O.D.

      夹头,刀具可以更换,同一个工具可以加工 1/4" O.D、 3/8"O.D、9/16"O.D钢管。

      • Adjusting gland nut,can adjust the depth of processing.

      调节压紧螺母,可以调节加工的深度。

      技术参数 Tecnnical Parameter

      型号

      Part No.

      钢管尺寸

      For Tubing Size

      CT2 1/8"O.D
      CTA 1/4"O.D
      3/8"O.D
      9/16"O.D

       手动工具操作指南 Manual Tool Operation Guideline                                        

      倒外圆锥操作说明 Inverted conical operation instruction

      • Clamping fixed block of coning tool.

      把倒外圆锥工具上固定块固定。

      • Adjust the slot width is slightly larger than the length of the cutting cone , loosen the gland nut , put the tube into the collets inside ,l ock gland nut.

      调整退刀槽的宽度稍大于切削锥面长度,松开螺母,把钢管插入夹头里面,锁紧螺母。

      • In the observation hole drops into the cutting oil , so that the cutting edges maintain lubricating.

      在观察孔上滴进切削油,使切削刃上保持润滑。

      • Right hand turn the handle,at the same time left hand rotation screw gland nut(clockwise) , at the beginning of the handle feels heavier , when the rotary gland is screwed almost to the end , speed up the rotation speed of the handle , When handle feels relaxed , show that complete the cutting , loosen the gland , pull out the tube and check the cone if is suitable , if not , continue above operation.

      右手转动手柄同时左手也旋转旋紧螺母(顺时针),初期手感较重,当旋紧螺母接近到底时,加快手柄旋转速度;当手感轻松,表明切削完成,把螺母松开,抽出钢管观察锥面是否合适,如不够继续上述操作

      手动工具操作示意图


       
      QQ在线咨询
      咨询热线
      0755-27967260
      销售热线
      18688799549
      捷丙直播-美女体育直播-【米fun直播】

        <form id="xvvnv"></form>

        <address id="xvvnv"></address>

          <address id="xvvnv"></address>

          <form id="xvvnv"><nobr id="xvvnv"><meter id="xvvnv"></meter></nobr></form>